This is a modular hobby servo pivoting joint assembly. It is part of the Tiny_CNC_Collection of parts designed to facilitate entry into robot building fun!
All parts print without supports or post processing! See Photos for assembly directions.
**All information regarding this project is on this page:
Required Hardware Servo: https://amzn.to/2ndSaVB
Recommended Material: https://amzn.to/2MmNOGA
*Can be printed in any material as long as all parts are the same material.
*Note 1: Included are STEP files so you can further modify these to your needs. Please enjoy these files and use them as you wish while respecting the sharing license.
**Note 2: If you do print these out snap a pic and share your make! I'd love to see how these designs are being put to use.
Video Demo @ 5min-36sec: https://youtu.be/EGnOKyPqEH8?list=PLxT-reigvGs1LH1x2Emq-B8s_OtdUZwxE&t=336
PLEASE NOTE PRINT SETTINGS ARE CRITICAL TO ACHIEVE STATED PERFORMANCE.
Print with 3 perimeters all sides top & bottom. (0.4mm nozzle dia)
Parts must be printed in the orientation they appear when you load them!