Digital thermometer stand for the popular Chinese thermometer, with the adjustable angle.
There are two versions of the base:
- With two pegs for wrapping the sensor wire.
- Plain base with no pegs.
Push the two clips firmly into the base, all the way in. They should fit snugly.
- If it is too much play, add a drop of super-glue.
- If it does not fit, just file/sandpaper the clip a little bit.
Attach the front to the clips, and be careful not to break it. Use ABS, PET or FLEX (PLA might break while mounting the top part to the stand).
IMPORTANT: First connect the front frame with the base, and then insert the thermometer. The front frame will be easier to bend without the thermometer attached, so it is less likely to break in the process!