I designed it for my concrete mold casting, helps to bring air bubbles to the surface,
allowing the mold to spread and smoothen the surface.
I used a cutted pinion gear for the unbalanced part, that makes vibration.
Shrink the motor cables for splashes if you are doing wet work.
If you don't want it hop on the table, fix it with a vise or screw it to the table screw points.
I also add the sketchup file, you can make modification if you want.
If you want download many diorama mold design, you can visit my profile.
Top Plate/ infill %100(for better vibration conduction)
Motor Mount/ infill %100(for better vibration conduction and stability)
Motor Ring Mount/ infill %100(for better vibration conduction and stability)
Work Part Support/ İnfill %100,nozzle 0.4 or thinner,Layer High 0.1 or less
Other parts are your choice...
I used "esun pla+ black"
Top Plate (x1)
Bottom Plate (x1)
Motor Mount (x1)
Motor Ring Mount (x1)
Coil Spring Chamber (x8)
Work Part Support (?)
m3 15mm (x2) /panhead pozi/
m3 20mm (x9) /panhead pozi/
m3 40or30mm (x4) /panhead pozi/
m3 50mm (x2) /panhead pozi/
m3 nut (x19)
m3 bolt (x15)
Coil Spring 100or50x11mm/wire thickness 1.5mm (x4)
540 Brushed rc Motor/Mounting holes: 25mm (x1)
Unbalanced Pinion Gear or Something Else You Might Find