- If the lip's wall thickness is too thin. Some slicer will make an error.
- if the box's wall thickness and the lip's wall thickness don't match. The script will stop and recommend the box's wall thickness on the console window.
- Rename the variables
- Add the comment for open in the Customizer
- Change the position of the box and the lid to the same level.
If you like it, please click [Likes].
Material - PETG
Nozzle - 240 degree
Bed - 60 degree
Print speed - 30 mm/sec
Print with brim
3 vertical walls
4 horizontal layers