Loading

MakerBot Print is our newest print-prepration software, which supports native CAD files and STL assemblies,
allows you to interact with all your printers via the Cloud, and many other exciting new features.

Download Now

sn4k3

Creality Ender 3 Pi Cam Mount

by sn4k3 Jul 3, 2018
Download All Files

Thing Apps Enabled

Please Login to Comment

I was having issues with all other pi cam mounts. Printed this once, fits and worked perfectly. Thanks very much.

This came out perfect for my v2 Pi cam, thank you very much! Printed at 200, bed 60 with brim and supports in bronze

Great model! What size screws do you suggest to secure the camera in place?

I used this and an m.25, it slid through but seems to be sturdy, plus its free https://www.thingiverse.com/thing:2838485

Most Common Metric Nut And Bolt - M2 through M20
by TheTNR

M2.5 or M2 will fit x 3mm

Perfect fit! Thank you.

bonjour

il y a t il l'encoche sur l'arriere pour le clipser au bras qui se fixe sur le cache moteur qui est dans le dossier avec la version cam V1?

I really wish this was in 2 separate files as the back keeps falling over.

The front seems to fit perfect by the way!

Thats easy, if you have windows 10 open with 3D Builder and split the object in two and export, if you wish i can also split them for you

I rotated it to put back on the bottom and stopped the print when it started printing just the supports for the front. Worked out fine. I just need to file down the edges a bit to get it to completely close.

Thank you!

I find the orientation i have the best for print, but you must use supports. Your print is not attaching to bed?

@sn4k3 Found your thing in the comments of the original design. This turned out to be a much better fit for my Pi Cam v2.1 in my opinion, thanks for the remix! I'll post a make once the bracket is done later :). Cheers!

Thank you for your support :) Looking forward for your make! Regards

Perfecto en mi Pi Cam REV 1.3. Muchas Gracias, me ha salvado.

Thank you for your feedback :) Regards

I'm finding the other one doesn't really fit right/had to cut ribbon slot right off/etc... gonna try yours, looks like it solves my problems...

Worked out pretty nice :) I didn't fine tune my ender yet, so this not may be the case for everyone, but I found that the camera rattles around in there a little bit. I stuck some weather stripping to the back panel to press against the camera pcb and it's pretty great. Thank you sir!

Nice to know :) The problem you facing is due the tune. Ender3 is a bit tricky to get it just on spot. When i got it, first prints overextrude.