here is my Handle for a Saw Blade. It's easier to remove support or such things. Because it's more handy than the the big original Handle.
It fits without any screw. Just click both together and done.
The click system is not perfect but useable.
I will work on it to find a better solution.
Have fun by printing
Length = 150 mm
High = 6 mm
Pin Ø = 1,17 mm
Pin high = 4,5 mm
- Print the "Handle top" and "Handle bottom"
- set the blade into the groove and press the pin inside the hole.
- take care of the direction of the blade (pull direction)
- click both parts together
and done !