I could not find a hinge that would work with a flush fitting door and mount far enough in on the plexiglass to be a strong mounting point and allow the door to swivel 180 degrees. (most were 90 degrees with the way my door is mounted) Also, since I havent converted to abs just yet I wanted something that was more than strong enough to support a 24x24 1/4in plexiglass door in pla. So I made one. I guess necessity is the mother of invention. Hopefully someone else can use it too.
everything prints without supports except the hinge itself. The plate is meant to mount on the back side of the plexi for additional support. Hardware kit from harbor freight. Smallest machine screw 1.5in worked perfect for the hinge thru the glass connection and the larger one 2in long I used for the hinge pin.