I'm a long time Battlefield fanboy so I decided design this and take it to the EA Play conference in LA on 06/16/18 in an attempt to get autographs of the DICE developers at the event. It was a BIG hit and I was able to track down 8 signatures including Mr. Battlefield himself Lars Gustavsson!!!
How to Make-
I have included 3 files
1- BFV-Full.stl ~ This is the complete Multilayered V. Use this file if you can use Dual extrusion or plan to paint. This is how i made my V I simply loaded Black and White filaments and dual extruded.
2- BFV-Bottom.stl ~ This is the Bottom/Outer Layer of the V and I made it with single extrusion in mind. Print this in conjunction with the top file if you plan to use glue or acetone bonding to adhere them together.
3- BFV-Top.stl ~ This is the Top/Thin Layer of the V and I made it with single extrusion in mind. Print this in conjunction with the Bottom file if you plan to use glue or acetone bonding to adhere them together.
1- I found a great picture of the V logo online and loaded it into PSD then I proceeded to cut out the V from the background image and removed all its color then saved the file as V.SVG
2- I then imported the V.SVG file into Tinkercad (yeah im a newb)
3- I extruded it to my desired height then duplicated it. I shrunk down the duplicate and raised it a few mm from the build plate and aligned it with the original V.
4- I then trimmed any excess or oddities from the design
Voila the V was complete.