MakerBot Print is our newest print-prepration software, which supports native CAD files and STL assemblies,
allows you to interact with all your printers via the Cloud, and many other exciting new features.
Apparently a little more clearance is needed to get the rear arm on the Bondtech to open all the way. I adjusted all bases for this clearance. If you have already printed the bases you can make a small notch with a Dremel or an Exacto. New base files 6.17 have the clearance.
6.15.2018 - 11PM
Was downloading and checking files and noticed the 2- 40mm cap files were a prior versions. Uploaded the correct versions.
Changed all the base files to give you the option to add the BLT mount to the left side of the base. The BLT can mount to either side. Just download the appropriate mount. It seems the left side works better for overall bed probing if used on the left for the Ender 3 & 2. The mount is adjustable so no matter the hot end you will be able to get the correct height from the bed. The base files work with any of the parts previously downloaded.
20% or more (denser infill will produce stronger prints)
When printing be sure to use plenty of walls or lines (depending on the Slicer). You want the prints strong so they can be secured tightly to the back plate and to each other. I use 6 lines in S3D or 2.4mm walls in Cura.
Remember to come back and post what you've printed as Make.
It's good for the designer and the community (that means you)!
To post a Make, come back to this Thing and click Post a Make.
Or, you can use the Thingiverse Mobile app found on
and the Apple App Store.