This is a regulation Tenpin Bowling Pin. It is modeled at 1:1 size meaning it is 15 inches tall by 4.766 inches in diameter. I have designed in four supports which can be trimmed off after printing.
This was designed with Cubify Invent for the Cube printer.
Scale this object before printing. The scale will depend on your application. Due to the narrow base, I recommend using rafts when printing. As stated in the description, there are supports already placed on the model - additional supports are not necessary. See the photo for the finished object after trimming away the supports.
Build a Ten Pin Set, use a marble, and knock 'em down.