This 3D printed art is shaped like the state of TN, and is designed to look like the TN State flag. I like to display it on a 3D printed easel.
It is 13.4 Inches X 3.25 Inches when assembled at normal scale. The main body is a little over 11 inches.
Make sure to print the pins that hold the main 3 sections together at 100% infill. You may or may not need supports for the alignment holes on the back of the blue disk.
The parts should snap together pretty well. Use CA (super) glue to hold everything permanently together.
The pins should be 100% infill.
The ring, stars, and white strip do better at about 35% infill.