I needed a small base for this realy cool mushroom lamp design.
So did a quick base design in Fusion360.
It's designed to the original file of the mushroom stem.
You can use this to house some small electronics for the leds or lamp.
The top can be glue'd or Screwed in with tiny screws to the mushroomstem.
The bottom and top part just friction fit into eacht other , so you can get to the electronics etc.
Included a small hole in the top part for the switch that came with the led light.
This might be to narrow for other switches , the hole could be used for small wires instead.
Prints support FREE! see added pictures.
I've printed this base with REAL Green PLA
No support / No raft/brim
I used a LED Disk Road Emergengy light bought at a euro/dollar store ( its for when your car breaks down etc)
Did some solderwork to the leds and switch in order to lenghten them.
NO supports or brim/raft needed.
I just print 0.2 and 20% infill at slow speed for a nice finnish