Reversible Camera Grip
Standard 1/4"-20 thread 3/4" length hex bolts accepted. Thumbwheel included with print (so you don't have to tighten everything by hand or with a wrench). Insert screw (m2x8) optional but highly recommended.
1/4 "20 thread on the base to adjust on tripods
Hole for Hand Wrist Strap Rope Cord Holder
Tilt of 20 degrees, can be used forward or backward
0.3 Pistol Grip / 0.2 Insert & thumbwheel
25% Pistol Grip / 50% Insert & thumbwheel
- 1/4"-20 thread, 3/4" length hex bolt
- M2 thread, 8mm length pan head machine screw
- (Optional) Pass a rope cord through the hole to adjust to the wrist hand
- (Optional) Adhesive-backed 60A Durometer 1/32" thick Neoprene Rubber with crisscross texture (doesn't have to be exact)
1- Group the hex bolt with the thumbwheel
2- Inserting the group into the handle
3- Push the threaded portion of the hex bolt out of the hole in the handle. Make sure you align the hex head with the cutout on the thumbwheel.
4- You can either glue in or screw in the insert.
5- (Optional) You can add Hand Wrist Strap Rope Cord Holder
6- (Optional) You can attach buy some rubber to secure the camera better and ease disassembly
The design is inspired by the design of blu006, published Dec 14, 2016.
Designed in Tinkercad with some modifications.
The grip is straight and symmetrical without adjustment for the fingers to use it with positive or negative angle so that the user chooses the most comfortable position.
I added a hole for Hand Wrist Strap Rope Cord Holder and a 1/4 "thread to place on a tripod
I correct the texture of the thumwheel so that it has a knurled finish