This is a corner mount for a Amazon Echo Dot. I designed this to allow the dot to be mounted into a corner a 30 degree angle (I think?). There is a gap behind the corner bracket to allow cords to pass through. There are two angled holes underneath for mounting. The cup has slots designed in it to allow sound from the bottom of the Dot. This is my first post and first time using all the various off-set planes in Fusion 360 so please be kind!
Enjoy, have fun! If you want the design file contact me and I will share.
Note: I also uploaded a stand I created for the same cup. Have not printed/used this design yet.
Add supports if you printer can't handle overhangs well. Mine doesn't so I used supports. I printed this in PLA with no issues. Printer on MP MakerSelect V2.
Mount the wall piece to the the corner, then screw the cup to the corner mount, then insert Echo Dot and plug in. I used a short flat head screw to mount the cup to the wall piece and the cup whole is counter sunk to allow flush screw head.
I designed this in Fusion 360. This is my first time playing with off-set planes so the design is not perfect. Mainly the wall mounting screws are not symmetrical to each other (this drove my nuts but could not fix).
Might adjust the design to tilt the Dot at a higher angle.