Parts for a 1:2 Model of Wheatley from Portal 2. In the end this will be around a 35 cm diameter animatronic Wheatley. WIP
All files should be available now.
Lenses are big enough to be heated and molded in house hold materials, no mold needs to be printed.
Some pieces need to be printed several times and some files are split and need to be assembled. Furthermore, some pieces need to be printed multiple times and assembled, so make sure you refer to https://www.thingiverse.com/thing:2868266 because it is the same build process. Pieces that need to be assembled will have numbers after their name.
All pieces that need to be printed multiple times are:
6x Axe Verin
6x Corps Verin
2x Paupiere (Needs Assembly)
2x Pivot Paupiere
2x Verrou Paupiere
2x Support Oreille Coeur (Needs Assembly)
2x Oreille Coeur
2x Sourcil (Needs Assembly)
All parts are made for a minimum print area of 130 mm x 150 mm x 130 mm.
Most parts should be assembled with glue and bolted together.
Files are not oriented as best as they could be, so use your better judgement in their orientation.
Custom Home-Brewed Printer
You'll do alot of sanding so don't worry about it too much right now.
Sand, test fit, prime, paint, wheather, and add electronics.
Model scaled after Articulated Wheatley from Portal 2 / Wheatley articulé de Portal 2 by Cerb.