This was designed in AutoCAD and was originally for a CO2 cartridge that's why theirs holes in the pictures. This model doesn't have holes though and is for anyone to remix or design their own rocket with. The nose cone and the body fit just snug enough to not fall out when tipped over. If anything is too big or small just scale it down slowly. Both the body and nose cone are hollow which means you can store and hide things inside. Or simply use it as decoration. Anything you can imagine do it. I do want this to be easily available for anyone to use or modify to fit their own needs.
For the printing I used a Maker Bot Replicator and a CTC Dual Extruder. Both came out fine and working. With maker ware as the software (for both) the prints came out great and took a little less than 7 hours in total. With Replicator G (used only with the CTC) the prints came out but not as snug and a little less eye appealing. This took a while to print with Replicator G almost 15 hours in total. I recommend 100% infill and rafts and supports.