End goal is to combine two orientations of brushless engines to work together and circulate a ( super cooled? ionized?) gaseous mix, inside the hood system, providing extra lift, and bringing the carrying platform much, much higher by taking the surfaces with us. this way we can keep pushing off of our own contained and controlled intra atmosphere. the upper red brushless slaps air over the hinner hull creating a lower pressure inside the casing, and the blue lower brushless slaps air under, and is then bent according to will, or orientation craft, working normally and upside down, if need be. the entire midsection has sort of pneumatic gimbal system to force it into an angle inside the cage, that in turn can be angled inside a uniwing crafts wing section. if all else fails, it should at least allow for a drone to be able to move vertically up and down quicker using two motors :P but im hoping for more upward punching power by bending the lower motors output downward by shape.so red slaps down, and blue slaps up and then down, or install flaps in the center of the mid piece to make the output direction variable in order for the entire craft tofunction upside down as well. imagine 5 of these bad boys, spread over a perfect well known disc shape, 4 on the rims and one larger one in the middle.