I was a bit concerned about the exposed magnets both visually and as regards to magnet damage and glue failure so this is a simple remix to move the magnets to be semi-enclosed and less visible. They will now attract through the plastic.
It should reduce the pull of the magnets and also make it look more like magic.
Works perfectly with Magnet Expert 1.6kg pull 20x6x1.5 neos. Of course YMMV. The door ones will be held in by the plexiglass. The catch magnets just rests in the groove. No need for glue.
NOTE: They may be fiddly to remove (they are to put in!) so check your polarities.
Edited base file in fusion 360