Designed these to use with my Traxxas E-Revo VXL 1/16. Its a dual extrusion print. I used PLA (green) and Flex (black). These tires drift more than the other tires we can buy for the RC cars. I tried several tires with different flexible materials none grip to the floor well (the Flex filament was the best).
Nonetheless great print to make and very fun use in the E-Revo.
The tyre has 95mm of outer diameter. The wheel is hex 12mm with 3.5mm of Offset.
There are 2 versions:
30mm width tire (for the front)
40mm width tire (for the back if you like to use wider back tires)
STL for left side don't forget to mirror for the right side. If you forget you can still use it but the tire pattern will not be symmetrical.
My other designs for the Traxxas E-Revo VXL 1/16:
(runcam nano version: https://www.thingiverse.com/thing:2872402 )
This is not a complicated print to a dual extruder printer but it takes a while to print, every layer has two materials. My only advice is go slow (i printed 25mm/s) because of the flex filament in the tyre.