As proposed by Bear Upgrade creator is changed the cutout for cam in the new version of the top of the RPi box. You can find all those files with datestamp of 18.05.2018.
I was in need for a Raspberry Pi housing which i could bolt to an Openbuilds V-Slot. In specific i am using it in the Prusa i3 MK2s Bear Upgrade. But it should fit to any other V-Slot profile as well or even to other aluminium extrusions. Just try it out.
For my personal bear upgrade i will put it above the rambo box and aligned just as the rambo box.
The original Case (see Remix Info) was an excellent piece of work. Thanks to the creator for it!
There is a second version for the cover with a cutout for the camera cable.
If you want to remix or change you can use the provided Fusion360 or IGS-Files.
P.s.: 100+ downloads of this and only 2 pictures of makes? Shame on you!
It should print nicely. Just make sure that the big flat face is facing downwards.
Drill the membranes with a 2,5 mm drill and clean up.
You will need 2 M5 flathead screws to fit it to an V-Slot and 4 M2,520 + 4 M2,5 nuts to close the cover.