Complete filament storage system for the Lock&Lock food container( https://www.amazon.com/dp/B00BUKKBTO ) with desiccant holder, cheap China thermometer/hygrometer ( https://www.ebay.com/itm/291979194271 ). With magnetic filament type tablets.
If links doesn't work, copy and paste in in a new window/tab of your browser.
Please read complete Print Settings and Post-Printing sections.
I choose the Lock&Lock HSM952 2.5ltr container because a lot of 1kg spools fit perfectly inside the container. The container is complete air and watertight.
box stand :
Print it with minimum infill (5%), print thing in the given orientation (side down), pause printing and insert an rare earth magnet at layerhigh 46.2mm. Be carefull, magnet can glue on your hotend !!! I recomment to glue the magnet with some superglue in the stand before continue printing.
filament tablets :
No infill needed, print it at 100% infill. Stop printing at layerhigh >2.0mm and change filament to a different color (or use multicolor, multimaterial, dual extruder ...). After printing glue an rare earth magnet at the bottom of the tablet.
desiccant holder :
Print it with some water resistant material, for example PETG. After printing fill it with some desiccant bags and close it with these cheap China thermometer/hygrometer.
First, see Misc Notes in Print Settings.
I use two rare earth magnets for the filament tablets to easily exchange :
- 3x3x3mm cube for the box stand
- 8x1mm disc for the filament tablets
- stands can be "connected" with some leftover 3mm filament
Be sure the magnets are all orientate in the same N-S direction before inserting it in the print !