There are already some brackets available for the Tornado, either for Ikea Lots mirror panels (4mm height!) or the (still great!) Ultrabase. I wanted to simplify things and reduced it to only two brackets with a heatbed cable strain relief included.
Note: the plate shouldn't be thinner than 4mm, or the nozzle might hit the bracket. If so, you can scale the height or use this remix by bacheporo:
Sources included, feel free to remix and show me your makes :)
- PLA / PET(G) / ABS / Nylon. Whatever you like. Ok. No flexible filaments... i think that goes without saying.
- Infill is good above 35%. 100% is overkill and not necessary.
- Keep an eye on shrinkage / growth / your extrusion multiplier:
Measure your print. The parts should be 74mm in both dimensions (outer perimeters, excluding the cable clamp!). If they aren't, scale the models or modify your multiplier or whatever caused it.