MakerBot Print is our newest print-prepration software, which supports native CAD files and STL assemblies,
allows you to interact with all your printers via the Cloud, and many other exciting new features.

Download Now


iPad 1 & 2 Wall Mount

by Flinke-Flasche Mar 30, 2018
Download All Files

Thing Apps Enabled

Please Login to Comment

iPad 2 is about 5 mm thinner than the iPad 1.
I can edit it that the iPad 2 fits

Thank You so much Flinke-Flasche!
I will wait the version for the Ipad 2 !!!

what is the exact thickness of iPad 1??

I added the mount for the iPad 2.
The iPad 1 is 13,4 mm thick. The iPad 2 is only 8,8 mm thick.
I made the mount 9 mm thick.
I hope it will fit.

Fantastic !!
Today i try print all.
I also have a tablet samsung 7 '' .. maybe it also serves
then I tell them

Hi, did you print the iPad 2 mount? Does it fit?

Comments deleted.


Many thanks for the design!

I tried to make the bottom part for the Ipad 2, but the dimensions are still a bit small. The bottom part has a small ledge which is pointing inwards. This distance is the limiting factor, it should be 9 mm, Maybe you used te wrong edge to choose the dimension of 9mm?

For the middle part I think its best to rotate the part in such a way that the wall side of the plate is on top. (reduce overhang)
The small

hope you understand :)


i think i know what you mean.
I'll look after it later and change the file.

Unfortunately, I have no ipad 2 to test it.

I removed the small ledge in the file. Look at the screenshot, did you mean this.

Yes exactly!
I made a mistake too, oops :) I have an ipad 4th gen not 2! Thickness is 9,41 mm. So printed on 105% scaled size it will fit.

The moving part works with the elastics, but I would advise to use a small ring between the part and the wall to prevent the moving part scratch the wall.

In my case I am going to print a rectangular box to create distance between the ipad and the wall so that a power connection can be used behind the ipad.

I will make some pics after it is complete!

Hello Flinke-Flasche!! Soory for the late... this week i can take a photo!