This is based on the original CMS plate released by redcat. Material was removed from the back to allow the axle truss more clearance, allowing more compression of the suspension. Panhard links were removed for a cleaner look. This is only for the 4 link setups.
Redcat parts on Thingiverse are released under the Creative Commons License Attribution- NonCommercial- ShareAlike 4.0 International (CC BY-NC-SA 4.0).
We want to share these parts with the world, and we want to inspire people to make and share their own parts for their vehicles.
In keeping with the non-commercial clause of this license, if you produce this part (servo_plate.stl) for others, you may not receive compensation in excess of $1 per part, plus your shipping costs. This number is calculated based on an average estimate of material cost and machine running costs.
If using PLA be sure to use a high infill. Shouldn't matter with ABS or PETG