MakerBot Print is our newest print-prepration software, which supports native CAD files and STL assemblies,
allows you to interact with all your printers via the Cloud, and many other exciting new features.
I've printed it and found that the design is too weak where the clip to the rear leg is attached to the leg part.
I suggest that you do it in the same way as the front leg.
Nice, thats exactly how i figured out i should have printed them, after i just threw them in the printer and the clips broke off :P
I note about print orientation could be useful to save people from this in the future.
Remember to come back and post what you've printed as Make.
It's good for the designer and the community (that means you)!
To post a Make, come back to this Thing and click Post a Make.
Or, you can use the Thingiverse Mobile app found on
Google Play
and the Apple App Store.
Back
Thanks!!! Thanks for this great desing. Best regards.
Very nice. I do wish they were a bit taller.
Nice design. Does not have a friendly print due to the chamfer angles.
Hmm :Looks like the legs sold by a company called gimbal guard are almost dead ringers for this design.
I've printed it and found that the design is too weak where the clip to the rear leg is attached to the leg part.
I suggest that you do it in the same way as the front leg.
You should print the rear leg as same as the print orientation of front leg.
Yes, I know. But the connection between the leg and clip is a weak area. The front leg design is much better.
Printed mine in ABS and have no issues with strength - maybe increase the infill?
Very nice design - thanks for sharing!
What is the difference in the two options for rear legs?
The bended one is vertical to ground.
What direction did you print them? I tried printing them flat but the clips broke of too easily.. (pla)
I will try to print them standing with the clip facing down and the tip of the leg sideways, that should give a much stronger clip i think (hope)
I’ve attached a new photo, you should print it vertically in order to make the clip stronger.
Nice, thats exactly how i figured out i should have printed them, after i just threw them in the printer and the clips broke off :P
I note about print orientation could be useful to save people from this in the future.
Thanks alot!
THANK YOU!!!!