In order to mount the E3D titan slimline motor some mods to the top linear bearing holder needed to accommodate the wiring connector
There are 2 types of bearing holder. 1 with just a cut out for the motor connector & 1 with an additional cut out to accommodate a bracket I needed to attach my cable chain.
My bracket stl is included and a step file for those wanting to adapt it.
In order to position the motor, a spacer for the stepper motor is required Attached is a 10mm thick spacer. I ended up needing 11 mm so I non-uniform scaled it to 110%
There is also a bracing strap for the belt clamp arrangement which requires
2 pcs M3 x 30mm Allen bolts
4 pcs M3 plain nut