lengthwise cable slicer for network or other 12mm and less cables. The blade adjusts on the x and y so you can get a angle and depth on the blade for best slicing. Accepts utility and straight edge blades- maybe other blades but i have not tested.
There are two bolts that push into the upper half of the blade to keep it in place
In hind sight, the holes for the nutserts could be bigger but it is plastic....
UPDATE: after the first iteration, i added slots in the body to separate the shells and to adjust the blade with another tool if needed
Added a circumference slicing hump to the blade area which looks like a slight hump in the bottom.
you will need (4) 3mm nutserts
(2) 8-10mm M3
(2) 16-20mm M3
The M3 x 8 are for the clamp down on the blade. These need to be pretty exact.
the M3x 16 are the clamp mating bolts. They can be longer since they will come out the other side.