Contents
Tags
License


Liked By View All
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.
Print Thing TagSummary
A cup holder designed for the IKEA POÄNG which should work on similar chairs as well. Also fits nicely on the footrest.
Note: the default diameter is 6 cm, which is just enough for my longdrink glasses, but too small for wider glasses or mugs. It can be easily tweaked to match other sizes: I've included the Fusion 360 file and all the dimensions are under Modify - Change Parameters.
If you don't want to mess with Fusion 360, leave a comment with the desired diameter and I'll create an STL for it!
Print Settings
Printer Brand:
Wanhao
Printer:
Rafts:
Doesn't Matter
Supports:
Yes
Resolution:
0.2mm
Infill:
50% full honeycomb
Post-Printing
I designed it as two parts to minimize the amount of supports needed. Although definitely not required, I did weld them together afterwards using a 3D pen. CA glue did not work for me due to the rough surface from the supports.