Completely adjustable in 3 axes and uses springs to hold the phone. its designed to fit my phone (moto x pure) but will accommodate many other phones. also sketch up and MS 3D builder include so you can easily modify to fit your needs. Use 9/32" or 7/32" compressions springs for arms, and small extension spring or rubber bands will work for the cell phone holder.
- Place arms toghther.
- Place pressuer plate in slots in on male end of arm.
- Place spring in Knob and tighten on end of arm. make sure spring conntect wiht pressuer plate.
- Glue pegs to there holes in cellphone holder
Print the press Plate 100% infill
The screw part of the arms is the weakest, so try at least 35% infill with PLA. less seams to work for PETG, I have not tried other material.