MakerBot Print is our newest print-prepration software, which supports native CAD files and STL assemblies,
allows you to interact with all your printers via the Cloud, and many other exciting new features.

Download Now


Webcam Cover - Super low profile

by Adelaar Mar 4, 2018
Download All Files

Thing Apps Enabled

Please Login to Comment

i tried out this print a couple of times along with the recommended settings on a CR-10S but somehow there seemed to be a bit of an issue on the first few layers not adhering well. Recently i tried again with the same recommended settings but i scaled it to 110%, it came out perfect! Tried a second print and it was great! Roughly an 8 min print with the recommended settings

thanks. exactly what I needed. I used CR-10S and printed with 60 mm/s without issues; so I can say it is safe speed for CR-10S users. just took me 30 seconds to print. I used double sided stamp sticker to stick

Great that you liked it!

What were some of the techniques you use to adhere the cover to the lid?

I used a putty adhesive, which is a putty that sticks very well to my laptop and this print, and becomes very hard after used. Though I sadly don't know what it's called.