This Ultimate iPhone X dock provides an all-in-one charging dock for iPhone X with a thin protective case, an Apple Watch and also Apple Airpods.
It comes in 4 possible flavors : Ultimate version : iPhone X + Apple Watch + Apple Airpods, but also lighter versions : iPhone X + Apple Watch dock only, iPhone X + Airpods dock only or iPhone X dock only.
(Updated on Mar 13th 2018 to add iPhone X + Airpods dock model)
Printed using Cura 1.1.0 customised for BCN3D Sigma, using stock 'fine quality' PLA profile
This is an redesign of my previous "iPhone 6/6s and Apple Watch stand (case compatible)" (https://www.thingiverse.com/thing:1051928) to make it compatible with iPhone X and add the "airpod" charge capability.
My previous design was still compatible with iPhone X, as long as you do not use any protective case which, in my opinion, was not an option for a 1k$ phone ...
I was also lucky to get my hands on Apple Airpods and I wanted to have a all-in-one charging solution for my nightstand.
I also wanted a 'light' solution for my office desk only to charge my phone. That's why I decided to propose derived version of the ultimate dock.
You will need 1, 2 or 3 charging cables for the dock depending the option you choose. 3rd party charging cables work well as long as they have the "official" Apple charging cable shape. I personnaly bought those for my own dock and they fit well : https://www.amazon.fr/gp/product/B01N6PFQ8N/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1.
Note that it is "normal" that the cable must be "forced" in place so that they do not come off each time you unplug you phone or the Airpod box. Depending your printer, light sanding might be required to be able to install the cable connectors.
Like my previous design, models including the watch stand come in 2 versions : a full version that you can print if you use supports, and a 'splitted' version that can be printed without supports but will required the watch base to be printed separatly and glued (epoxy glue works fine).
Finally, before starting your print, I recommand to print the template shape, just to make sure to your iPhone X with its case will fit in the dock.
If you like my design, buy me a beer !