Quick print sanding stick < 30min. This is a little quick change sanding stick I made. It only needs a short strip of sandpaper, so it's good for using up scraps. I liked the wedge style of Geosteed's remix:
and the slide ring of danstoner71's design:
so I made a combo so I could have a wedge that I can quickly reset the sanding strip to have fresh grit.
If you like it and find it useful, consider tipping me for a coffee :)
3/11/18 - Made a new clip for the sanding stick. This clip works on both the front and back sections of the stick.
Print with a brim for better adhesion. I used a 4mm width brim for my prints.