This is a phone mount for the 2017 Chevrolet volt plug in EV. It's printed in two parts and can be glued with any suitable phone holder; I've included one for my phone, the Xiaomi Mi5.
It's mounted on the driver side accessories bay column. It's roughly hand drawn, so the fit is not perfect around the column. The fit for the phone, and USB-C cable, is perfect (use the included Xiaomi USB-C cable.
A great accessory for using android auto, phone slides right in. M3 hardware may need to be pressed in, depending on printer tolerances.
Highly recommend printing in ABS or PETG, something with a little flex and won't warp too easily on a hot summer day.
- 2x M3 hex nut
- 2x M3x12 screw
- Xiaomi USB-C cable (or very similar)
Assembly is self explanatory, see pictures. Tighten down the screws to your liking. Slide USB-C cable in. Enjoy Android auto.
The fit isn't perfect so use a more flexible filament like ABS or PETG and tighten down the nuts a little bit. PLA will warp in a hot car.
Use a tiny bit of support on bed only for the USB-C insert.