Loading

MakerBot Print is our newest print-prepration software, which supports native CAD files and STL assemblies,
allows you to interact with all your printers via the Cloud, and many other exciting new features.

Download Now

Lanius

Adapter for CR-10 with DUET3D electronics

by Lanius Feb 23, 2018
Download All Files

Thing Apps Enabled

Please Login to Comment

Nice. I'm thinking of doing this. Can you send me you files and any wire diagrams ?

do the sd card and usb line up?

Comments deleted.

Loses a bit of signal strength. If you have the router nearby, there should be no problem.

do you find the wifi works well within the CR-10 enclosure? Tempted to do this mod myself.

Loses a bit of signal strength. If you have the router nearby, there should be no problem.

unfortunately this is very bad and dangerous design for Dued3D.
Duet Documentation says:
"The PCB is designed to transfer heat from the stepper drivers and power mosfets to the underside of the board. [...] Make the spacing between the back of the board and the panel or enclosure large enough to allow a good flow of air. [...] Position the fan to blow air underneath the board"
( https://duet3d.dozuki.com/Wiki/Mounting_and_cooling_the_board#Section_Cooling )

5mm is very small gap for air flow, so you moight unintentionally roast your Dues3D board.

CR10 have mosfet for the bed. My board is always cold, if you dont want to use is OK, but is not a bad design, is tested and working well. There are another 5 mm from the box, this make 10 mm total separation...