My parents have a "Hog" room in their new house so we decided to customize the light switches and outlet covers. This looks pretty sweet on the wall!
For the Forward Facing Hog:
I started this print in red and then depending on layer settings I paused the print and switched the remainder of the print to black.
I used three colors on this print, but i only have single extruder so i had to pause each at the layer I wanted the next color and then resume. I started with red, went to white, and then finished with black.
If you want you can just do red to black and then just paint the white portions. See Post-Print below.
For the Script A:
I used two colors, white then red.
For the Double Switch:
I used two colors, red then black.
To get the white portions I painted these post print.
A little tip is to be careful, but if you get it on the black portions a black sharpie works wonders.
Standard Light Switch Plate
I found the design for a standard light switch (probably on here) and added the forward facing hog I previously had.