Eachine E58 Drone Propeller Repair Part. (updates below)
Having the E58 just a few days... and of course a few bumps in the wall, I sustained some damage, not to the props but to the part assembly holding them together.
Well Eachine gives you a few extra propellers... but...couldn't find an extra part like this thing in the package...go figure.
So.. at first I thought I couldn't get a successful print because of the tiny shapes.. that they would just print deformed.. but I've been modifying the print to compensate for shrinkage and melt.. and I'm starting to see the possibility of having a successful print.
Most likely you will need a few small drills to clean up the print.
By the way ... I'm I the only one that's constantly adjusting for drift on this thing? I've noticed I can get a solid holding position as long as I don't rotate the E58.. but once I rotate.. it needs to be readjusted for drift.
Update: 2/24/18.. Surprisingly this printed better than expected. using a little emery cloth and the right size drill bits.... it was easy to clean up.. and is has lasted more abuse than the original.
For Propeller guards see: