Loading

MakerBot Print is our newest print-prepration software, which supports native CAD files and STL assemblies,
allows you to interact with all your printers via the Cloud, and many other exciting new features.

Download Now

peloquin17

Rising Sun insert

by peloquin17 Feb 13, 2018
Download All Files

Thing Apps Enabled

Please Login to Comment

I think I did 30% infill. All machines are different, and you need to see what works best for yours. My first few prints were brittle, until I made adjustments. I also included a regular box in the files as a substitution.

For some reason the pillars are incredibly brittle. What settings did you print this with?

With the part that the clans are in, are there spots for the bases to be recessed or are they just sitting flat? How contained are they if the box got shook up? Would they go all over the place?

There is a slight recess for the base to sit in. Yes, if you shake the box, they will fall out. That’s why i included a generic box that you can print instead.

This looks great. Are you also planning to make an insert for the Diamyo box?

I made one, but I’m really not thrilled about it, so I wasn’t planning on uploading. It requires you keep the plastic insert to hold the figures.

If you're not planning on revisiting it I might take a shot at it myself.

I would love to see what you’ve made!

I found the tolerances on these a little tight. My pieces were barely fitting and I may need to print it again scaled up 5% or so

All my pieces fit fine with no adjustment.

The ronin markers were a bit tight, but I just sanded the inside a little and it was no problem.

Maybe because I printed in ABS? ABS tends to shrink a little.

Ahhh...I didn’t even think about that. I did mine in PLA.

I’ll put up a note in the description. Thanks!