The official Filastruder V2 laser cut case does not come with a rear cover, leaving the stall protection board exposed. This cover encloses the stall protection board and its electrical connections while maintaining access to the LCD and buttons.
It attaches to the frame using the two original stall protection board mounting bolts. The stall protection board itself mounts to the cover using four M3-25mm bolts. Two button extensions should be printed and placed through the holes labeled "in" and "out" from the inside of the cover. The stall board cover goes on the back of the stall protection board to prevent any shorts from unintended metal contact.
4x M3-25 bolt
4x M3 nut