For a nice clean looking a Titan extruder mount assembly with cover to hide all the cable stuff behind.
I wanted to mount the Titan Extruder to the BW. So I designed an adapterplate together with a cover and the front plate, also the parts for adding nozzle cooler and cable chain holder.
The cooler is the helix model here from TI https://www.thingiverse.com/thing:2084339 but with a different holder.
The X gantry plate needs to cut by 10mm in high.
The cable chain holder on the right side is mounted with two M4 screws directly on the existing chain holder.
You can add support for the base plate for the 4 M4 screws for the stepper motor.
The stepper motor will in my case not overheat. The heatsink fan will blow enough air behind the cover. The temperature is pretty ok.
All parts were made with PLA.