Since i put the 120mm Fan Base
under my controlbox i need some higher Foots. So i added them (the ones with 4 holes)
This is a leg for my CR-10 Mini, so you can put the Control-Box under the Printer. It mounts screwless into the Aluminium-Profile and you also do not have to remove the original Feets.
Maybe, when you have a slippery desk, you have to put some rubber under the feets.
And since they are not screwed, its possible, that they turn over when an impact is hard enough, so do not use them (or secure them with zip-ties) if you have small children, cats or dogs in your room, where your printer is
It also Fits to the normal CR-10
And a User named Arcane3D made some Feets for the Feets to get it mor stabilized or, printed in TPU, use it for Noise reducing and damping
And yes, you have to print 4 of them ;)
Designed in Tinkercad
Please leave a Like or a comment, thank you!
Ive printed them with 0,28mm resolution, 80mm/s and PLA
The higher ones with a 0.6mm nozzle, 0.4mm layerheight and 80mm/s to get printtime low.