10/2/2018: Updated parts with correct heights and corrected model splitting properly in Slic3r. Shortened file names for easier viewing in Thingiverse.
06/02/2018: All the parts have now been uploaded with the correct tolerances. Happy printing. :) As always just ping me if you have any issues or need a different size.
2/3/2018: Noticed an issue in the thread of the model. My mirrored parts have the opposite thread! Not an issue if you match the sides up correctly but still strange enough I want to fix. The test print has this issue. Revising the design slightly to have a beeter fit. Its tight in PLA so think ABS might be an issue with shrinkage. Anyone care to test?
1/2/2018: Looking for help: I need some to print a test of the 2 test parts to see if they fit together properly using another 3D printer. If someone can test and post a pic and pass comments that would be great. Print "Test Fit.stl" and see if it screws together properly. DONE!
This is a remix of my last model with some improvements. The plan is to provide versions for 3,4,5 & 6mm plexiglass as many of you have requested this. I also plan on increasing the internal floor space slightly bringing the glass closer to the edge. In addition I'm redesigning the leg extensions so they can be printed as a separate parts should you wish to re-use/change these in the future. I'll be looking for some test printers if anyone is interested.
1 - Back legs are a duplicate of each other
2 - Front legs have 3 options.
A - Slots for perspex that is removable
B - Backstops for a potential swing door
C - Blank for space at the front (potential other door option)
File Format - "Total Internal Height" x "Perspex Thickness".stl
Note: You don't need to use or print the extentions. If you dont the total internal clearance will be 460mm.
Total Internal Clearance - This will be the final internal height once you put all the parts together.
Perspex Thickness - This is the thickness of the perspex that can be used with the stl.