MakerBot Print is our newest print-prepration software, which supports native CAD files and STL assemblies,
allows you to interact with all your printers via the Cloud, and many other exciting new features.

Download Now


CR-10 Tool & SD Card Extension Holder with Pi Case

by Emitskatan Jan 30, 2018
Download All Files

Thing Apps Enabled

Please Login to Comment

I started running #2 and saw my skirt wasn't nearly big enough. When I looked in Cura, the model wasn't flat on the print base. I performed a 'lay flat' operation and I'm starting the run now. Looks good so far!

I've only printed the smallest part so far. That one worked great. I attempted to print the second part (ends in _2.stl) last night and it failed. I noticed that the first layer (when printing it with the overhang pointing up) was a bit off. I did a -0.2mm offset in S3D and now it looks like the first layer will be a bit better.

I've attached a picture of both first layers so that you can see what I'm talking about.

Thanks for breaking this up though as the single piece wants over a day to print and that makes me very nervous as a new 3d printer.

Thanks, yeah I think I had to drop it under the print bed that little bit too. Still learning to use meshmixer, I might try to clean it up a bit if I get some more time

No worries. I just wanted to make sure that others did the same thing before they endeavor on the print. I'll be trying to print it again later this week and then I'll tackle the final piece. I'll add a make of it to this once it's all done.