The original carriage is exceptionnal !
The original E3DV6 mount with 2 40mm fan is terrible
The original BL touch support is a great idea.
So it's why i try to merge both on 1 (with some update)
I made this remake to easy remove the bloc from the E3DV6.
The FAN each side can move from the bottom position to the top position.
And when FAN support are on horizontal position you can unlock the block from the E3DV6.
Fully printed and tested. I print it with ICE PET Green filament.
Video in french https://youtu.be/DO2Tx1VyhmY
Last video : https://www.youtube.com/watch?v=ItxwjjD-jWQ
Update 1 :
I dispatch the Bl_Touch support in 3 files to print them.
I create the part 2 to fix the distance of the Bl touch when you set it (sse the last picture.
You must flash your firmware with marlin.
My settings :
define X_PROBE_OFFSET_FROM_EXTRUDER -35 // X offset: -left +right [of the nozzle]
define Y_PROBE_OFFSET_FROM_EXTRUDER -44 // Y offset: -front +behind [the nozzle]
define Z_PROBE_OFFSET_FROM_EXTRUDER 0 // Z offset: -below +above [the nozzle]
To test if FAN are OK i print this -> https://www.thingiverse.com/make:441219
For the speed 80 mm/s Bridge are good.
My blog to see all upgrade on the E10 printer https://babounx.blogspot.fr/