Loading

MakerBot Print is our newest print-prepration software, which supports native CAD files and STL assemblies,
allows you to interact with all your printers via the Cloud, and many other exciting new features.

Download Now

Adverse_Effects

TronXY_X1_Y-axis_BIG_UPGRADE_KIT

by Adverse_Effects Jan 26, 2018
Download All Files

Thing Apps Enabled

Please Login to Comment

Hi, any chance you will make a "3 point leveling" printbed?

as in 1 that has only 3 adjusting screws and springs?
i have never seen anything like that in 3d Printing but would be easy to make i guess
but there are lots of other things would need to know about your setup because there are LOTS of things that can be different that would change the way its designed

Hi, thanks for a prompt replay!
Here you can read about 3 points leveling: https://drmrehorst.blogspot.com/2017/07/3-point-print-bed-leveling-vs-4-point.html.
I will remove one of the bracket from one side and move the other in the middle. Probably the side with two wheels should be modified.

i suppose it can be done but 3 point is best for rough uneven substrate but a a printer if the parts are good then its all smooth even base

your carage should not be uneven to start with and your printing platform if its bent it should be replaced

a 3 point system wont help ether problem

by the way i am an Ex motor mech and have been designing things since i was 12 so i do understand the principle of 3 point leveling and if you need it on your printer you have more problems than 3 point leveling will help