you sick of that dam Y axis wobble on your X1?
well have i got a fix that will make you wet in your pants wink
this is most likely the BIGGEST UPGRADE SET you will do to and for your TronXY X1
this has taken me weeks to get the 6 parts to work together and work they do, flawlessly.
now you have to print with support on and the parts are already in the correct orientation for printing
you will need to ether need to print out my "TronXY X1 Control Box and base" or work out some other way to lift the X1 base up 25mm to make this set fit
here is 1 of the test units
here are some on the finished units on my X1
if you install this upgrade you will need to reverse the direction of the stepper motor
3 or 4 outer wall / shells (1.2mm to 1.6mm)
2mm top and bottom (about 10 layers at 0.2mm you need the strength)
i printed at 60mm but you print at what ever speed you feel comfortable with