This hotend assembly is composed of two halves that bolt together around the E3D heatsink groove-mount head. This is then bolted to the Anycubic stock effector plate.
Mountings for 2 x 4010 fans.
Added airduct and combined airduct + 80mm automotive LED halo ring holder.
Updated all hole tolerances to provide more grip when the bolts are tightened.
Updated fan mounts to use pegs on lower holes to allow for better fastening of the whole assembly to the effector plate.
0.1 - 0.2 (I prefer 0.15)
Print the two main sections standing up on their feet. Print the airduct or airduct+led combo with the airduct plate on the bed.
I use Polymaker PolyMax as it is close to ABS in performance but easy as PLA to print.
Make sure all supports are removed from inside the airducts and screw holes !