MakerBot Print is our newest print-prepration software, which supports native CAD files and STL assemblies,
allows you to interact with all your printers via the Cloud, and many other exciting new features.
Step by step guide for installing the nextion and sd card reader on mks 1.4 gen.
1) configure and download MK4 DUO FROM THE SITE (in the photos the detail of how they should be set lcd and sd card reader) http://marlinkimbra.it/configurator/v4_3_3/firmware_configurator.php
2) within the file you have downloaded you will find the folder NEXTION, enter and copy the tft file into an SD insert it in the nextion and power the display to load the software
3) connect the display and SD as shown in the attached diagram
4)connect the Y switch to the X+ MAX END STOP connector
Remember to come back and post what you've printed as Make.
It's good for the designer and the community (that means you)!
To post a Make, come back to this Thing and click Post a Make.
Or, you can use the Thingiverse Mobile app found on
and the Apple App Store.