MakerBot Print is our newest print-prepration software, which supports native CAD files and STL assemblies,
allows you to interact with all your printers via the Cloud, and many other exciting new features.

Download Now


LCD Controller 12864 Enclosure

by k4en Jan 14, 2018
Download All Files

Thing Apps Enabled

Please Login to Comment

wall too thin, fail and fail print

Wall thickness is 1.2mm. For 0.4mm nozzle, that's 3 passes which should be easily printed and structurally sound. Many of us print calibration parts with 0.4mm wall thickness. I've printed 3 of these parts on a Prusa i3 MK2 and one on a Printrbot Play without problems. I would suggest you check your slicer to insure you're not getting hollow sides due to Extrusion Multiplier or Extrusion Width settings. I'm sure your Ultimaker 3 Extended (your listed printer) can handle printing this part if properly sliced and set up.

I think the whole enclosure wall thickness should be larger. not need to save little filament.
it is not matter of the printer can print it or not.
of course, thanks