This is a motor protector i designed for the BFight210 or BFlight210 Frame.
It can easily be mounted securely by using just one little zip Tie.
I designed it to be used with the Brotherhobby Returner R5 2306 Motors but should be a good fit as well for any 22-23xx motor
There are 2 versions in 30 and 31.5mm inner diameter.
Leave a like and share your makes if you find this useful ;-)
Print this in TPU with 1 or 2 Perimeters.
It has been designed especially to be printable without support
This was designed using a scan of the actual Arm in Fusion 360