Remix of the Fallout Board Game insert for improved storage when vertical.
Also fixes some issues I had with the parts.
The encounter card tray has been thinned down, as it didn't fit in the previous design. The mini tray has been adjusted to have them standing up, and magnetized. The magnets press fit into the printed compartment (10mm x 2mm neodymium magnets).
I used a dremel to dig out a hole for the magnets that were glued into the miniatures.
I added a separate "caps" tray, for those who want to use upgraded components like real bottlecaps.
I made the S.P.E.C.I.A.L. tray taller, because vertical storage caused all of the tokens to fall out of the original tray.
Some of the stacked parts still need filing down to fit properly.
ALSO, I took the original insert included in the game (the cardboard), and I used it to make two layers that sit under all of the printed components. This raises the trays so they have no spilling when stored vertically.
Printed on i3 MK3, but that's not an option.
Some parts printed in 0.15mm, others in 0.1mm.
20% infill to prevent pillowing.
Stacked parts may need filing to fit properly